|
|
|
|
 |
3mm: Fully Threaded (Pack of 5)
|
|

Pack of Five 3mm Screws
|
|
 |
|
|
|
|
 |
4mm: Fully Threaded (Pack of 5)
|
|

Pack of Five 4mm Screws
|
|
 |
|
|
|
|
 |
5mm: Fully Threaded (Pack of 5)
|
|

- The 5mm TriStar™ screw is fully threaded and
designed to be used to secure membranes and the TriStar™ titanium mesh. The TriStar™
screws
are sold in packs of 5.
- Each screw in the TriStar™ Bone Graft Fixation System is
self-drilling and does not require the clinician to pre-drill a hole in the
host.
- Each screw also features the Impladent
Ltd. tapered SquareLock Connection which provides and ultra secure fit that
allows the user to pick up and deliver the screw using only one tool, reduces
driver slippage and provides excellent driving torque upon delivery.
- All short screws (3mm, 4mm and 5mm) are
designed to secure titanium mesh and membranes.
There is no need to use an additional tool or a mallet to deliver.
|
|
 |
|
|
|
|
 |
6mm: 4mm Threaded / 2mm Unthreaded (Pack of 5)
|
|

- All medium length screws (6mm, 8mm,
10mm, 12mm and 14mm) are partially threaded and tapered. These screws are
designed to secure bone blocks and as adjustable tenting screws. For bone blocks, the partially unthreaded
portion functions as a lag screw and provides intimate contact of the bone to
the host. Use a 2.0mm drill to drill
through the bone block. Blocks secured by fully threaded screws cannot achieve
this level of host adaptability without the thread binding to the block and
pulling away from the host.
- The tapered design on the medium length
screws also functions as an Adjustable Tenting Screw allowing the clinician to
adjust the height/direction from 1-2mm when used in tenting procedures.
Competitor tenting screws have a flat shelf in-between the threaded and
unthreaded portions which locks in the height of the tenting portion of the
screw. Our tapered design allows the
clinician to adjust the height of the “tent-pole” to suit the clinical
application.
|
|
 |
|
|
|
|
 |
8mm: 5mm Threaded / 3mm Unthreaded (Pack of 5)
|
|

- All medium length screws (6mm, 8mm,
10mm, 12mm and 14mm) are partially threaded and tapered. These screws are
designed to secure bone blocks and as adjustable tenting screws. For bone blocks, the partially unthreaded
portion functions as a lag screw and provides intimate contact of the bone to
the host. Use a 2.0mm drill to drill
through the bone block. Blocks secured by fully threaded screws cannot achieve
this level of host adaptability without the thread binding to the block and
pulling away from the host.
- The tapered design on the medium length
screws also functions as an Adjustable Tenting Screw allowing the clinician to
adjust the height/direction from 1-2mm when used in tenting procedures.
Competitor tenting screws have a flat shelf in-between the threaded and
unthreaded portions which locks in the height of the tenting portion of the
screw. Our tapered design allows the
clinician to adjust the height of the “tent-pole” to suit the clinical
application.
|
|
 |
|
|
|
|
 |
10mm: 5mm Threaded / 5mm Unthreaded (Pack of 5)
|
|

- All medium length screws (6mm, 8mm,
10mm, 12mm and 14mm) are partially threaded and tapered. These screws are
designed to secure bone blocks and as adjustable tenting screws. For bone blocks, the partially unthreaded
portion functions as a lag screw and provides intimate contact of the bone to
the host. Use a 2.0mm drill to drill
through the bone block. Blocks secured by fully threaded screws cannot achieve
this level of host adaptability without the thread binding to the block and
pulling away from the host.
- The tapered design on the medium length
screws also functions as an Adjustable Tenting Screw allowing the clinician to
adjust the height/direction from 1-2mm when used in tenting procedures.
Competitor tenting screws have a flat shelf in-between the threaded and
unthreaded portions which locks in the height of the tenting portion of the
screw. Our tapered design allows the
clinician to adjust the height of the “tent-pole” to suit the clinical
application.
|
|
 |
|
|
|
|
 |
12mm: 6mm Threaded / 6mm Unthreaded (Pack of 5)
|
|

- All medium length screws (6mm, 8mm,
10mm, 12mm and 14mm) are partially threaded and tapered. These screws are
designed to secure bone blocks and as adjustable tenting screws. For bone blocks, the partially unthreaded
portion functions as a lag screw and provides intimate contact of the bone to
the host. Use a 2.0mm drill to drill
through the bone block. Blocks secured by fully threaded screws cannot achieve
this level of host adaptability without the thread binding to the block and
pulling away from the host.
- The tapered design on the medium length
screws also functions as an Adjustable Tenting Screw allowing the clinician to
adjust the height/direction from 1-2mm when used in tenting procedures.
Competitor tenting screws have a flat shelf in-between the threaded and
unthreaded portions which locks in the height of the tenting portion of the
screw. Our tapered design allows the
clinician to adjust the height of the “tent-pole” to suit the clinical
application.
- Additional longer fully threaded screws
are available in lengths of 15mm, 18mm, 21mm and 24mm for Vertical Vascular
Osteotomy Procedures.
|
|
 |
|
|
|
|
 |
14mm: 7mm Threaded / 7mm Unthreaded (Pack of 5)
|
|

- All medium length screws (6mm, 8mm,
10mm, 12mm and 14mm) are partially threaded and tapered. These screws are
designed to secure bone blocks and as adjustable tenting screws. For bone blocks, the partially unthreaded
portion functions as a lag screw and provides intimate contact of the bone to
the host. Use a 2.0mm drill to drill
through the bone block. Blocks secured by fully threaded screws cannot achieve
this level of host adaptability without the thread binding to the block and
pulling away from the host.
- The tapered design on the medium length
screws also functions as an Adjustable Tenting Screw allowing the clinician to
adjust the height/direction from 1-2mm when used in tenting procedures.
Competitor tenting screws have a flat shelf in-between the threaded and
unthreaded portions which locks in the height of the tenting portion of the
screw. Our tapered design allows the
clinician to adjust the height of the “tent-pole” to suit the clinical
application.
- Additional longer fully threaded screws
are available in lengths of 15mm, 18mm, 21mm and 24mm for Vertical Vascular
Osteotomy Procedures.
|
|
 |